kernel/device_id.rs
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218
// SPDX-License-Identifier: GPL-2.0
//! Generic implementation of device IDs.
//!
//! Each bus / subsystem that matches device and driver through a bus / subsystem specific ID is
//! expected to implement [`RawDeviceId`].
use core::{
marker::PhantomData,
mem::MaybeUninit, //
};
/// Marker trait to indicate a Rust device ID type represents a corresponding C device ID type.
///
/// This is meant to be implemented by buses/subsystems so that they can use [`IdTable`] to
/// guarantee (at compile-time) zero-termination of device id tables provided by drivers.
///
/// # Safety
///
/// Implementers must ensure that `Self` is layout-compatible with [`RawDeviceId::RawType`];
/// i.e. it's safe to transmute to `RawType`.
///
/// This requirement is needed so `IdArray::new` can convert `Self` to `RawType` when building
/// the ID table.
///
/// Ideally, this should be achieved using a const function that does conversion instead of
/// transmute; however, const trait functions relies on `const_trait_impl` unstable feature,
/// which is broken/gone in Rust 1.73.
pub unsafe trait RawDeviceId {
/// The raw type that holds the device id.
///
/// Id tables created from [`Self`] are going to hold this type in its zero-terminated array.
type RawType: Copy;
}
/// Extension trait for [`RawDeviceId`] for devices that embed an index or context value.
///
/// This is typically used when the device ID struct includes a field like `driver_data`
/// that is used to store a pointer-sized value (e.g., an index or context pointer).
///
/// # Safety
///
/// Implementers must ensure that `DRIVER_DATA_OFFSET` is the correct offset (in bytes) to
/// the context/data field (e.g., the `driver_data` field) within the raw device ID structure.
/// This field must be correctly sized to hold a `usize`.
///
/// Ideally, the data should be added during `Self` to `RawType` conversion,
/// but there's currently no way to do it when using traits in const.
pub unsafe trait RawDeviceIdIndex: RawDeviceId {
/// The offset (in bytes) to the context/data field in the raw device ID.
const DRIVER_DATA_OFFSET: usize;
/// Obtain the data pointer stored inside the device ID.
///
/// # Safety
///
/// `&Self` must be stored inside a `IdArray<Self, U>`.
unsafe fn info_unchecked<U>(&self) -> &'static U {
// SAFETY: By safety requirement of the trait, this is `self.driver_data as *const U` and by
// the safety requirement of the function, this is stored in `IdArray<Self, U>` so is
// convertible to `&'static U`.
unsafe {
core::ptr::from_ref(self)
.byte_add(Self::DRIVER_DATA_OFFSET)
.cast::<&U>()
.read()
}
}
/// Obtain the data pointer stored inside the device ID.
///
/// # Safety
///
/// `&Self` must be stored inside a `IdArray<Self, U>`, or has NULL (or 0) as driver data.
unsafe fn info_unchecked_opt<U>(&self) -> Option<&'static U> {
// SAFETY: By safety requirement of the trait, this is `self.driver_data as *const U` and by
// the safety requirement of the function, if this is stored in `IdArray<Self, U>`, this is
// convertible to `Option<&'static U>`. Otherwise it is NULL which is `None` as
// `Option<&U>`.
unsafe {
core::ptr::from_ref(self)
.byte_add(Self::DRIVER_DATA_OFFSET)
.cast::<Option<&U>>()
.read()
}
}
}
/// A zero-terminated device id array, followed by context data.
#[repr(C)]
pub struct IdArray<T: RawDeviceId, U: 'static, const N: usize> {
// This is `MaybeUninit<T::RawType>` so any bytes inside it can carry provenance in CTFE.
// If this were `T::RawType`, integer fields would not be able to contain pointers.
ids: [MaybeUninit<T::RawType>; N],
sentinel: MaybeUninit<T::RawType>,
phantom: PhantomData<&'static U>,
}
// SAFETY: device ID is plain data plus a `&'static U` and can thus be sent between threads safely
// if `&U` can.
unsafe impl<T: RawDeviceId, U: Sync + 'static, const N: usize> Send for IdArray<T, U, N> {}
// SAFETY: device ID is plain data plus a `&'static U` and can thus be shared between threads safely
// if `&U` can.
unsafe impl<T: RawDeviceId, U: Sync + 'static, const N: usize> Sync for IdArray<T, U, N> {}
impl<T: RawDeviceId + RawDeviceIdIndex, U: 'static, const N: usize> IdArray<T, U, N> {
/// Creates a new instance of the array.
///
/// The contents are derived from the given identifiers and context information.
pub const fn new(ids: [(T, &'static U); N]) -> Self {
let mut raw_ids = [const { MaybeUninit::<T::RawType>::uninit() }; N];
let mut i = 0usize;
while i < N {
// SAFETY: by the safety requirement of `RawDeviceId`, we're guaranteed that `T` is
// layout-wise compatible with `RawType`.
raw_ids[i] = unsafe { core::mem::transmute_copy(&ids[i].0) };
// SAFETY: by the safety requirement of `RawDeviceIdIndex`, this would be effectively
// `raw_ids[i].driver_data = ids[i].1;`.
unsafe {
raw_ids[i]
.as_mut_ptr()
.byte_add(T::DRIVER_DATA_OFFSET)
.cast::<&U>()
.write(ids[i].1);
}
i += 1;
}
core::mem::forget(ids);
Self {
ids: raw_ids,
sentinel: MaybeUninit::zeroed(),
phantom: PhantomData,
}
}
}
impl<T: RawDeviceId, const N: usize> IdArray<T, (), N> {
/// Creates a new instance of the array without writing index values.
///
/// The contents are derived from the given identifiers and context information.
/// If the device implements [`RawDeviceIdIndex`], consider using [`IdArray::new`] instead.
pub const fn new_without_index(ids: [T; N]) -> Self {
// SAFETY: `T` is layout-wise compatible with `T::RawType`, so is the array of them.
let raw_ids: [MaybeUninit<T::RawType>; N] = unsafe { core::mem::transmute_copy(&ids) };
core::mem::forget(ids);
Self {
ids: raw_ids,
sentinel: MaybeUninit::zeroed(),
phantom: PhantomData,
}
}
}
/// A device id table.
///
/// This trait is only implemented by `IdArray`.
///
/// The purpose of this trait is to allow `&'static dyn IdArray<T, U>` to be in context when `N` in
/// `IdArray` doesn't matter.
pub trait IdTable<T: RawDeviceId, U> {
/// Obtain the pointer to the ID table.
fn as_ptr(&self) -> *const T::RawType;
}
impl<T: RawDeviceId, U, const N: usize> IdTable<T, U> for IdArray<T, U, N> {
fn as_ptr(&self) -> *const T::RawType {
// This cannot be `self.ids.as_ptr()`, as the return pointer must have correct provenance
// to access the sentinel.
core::ptr::from_ref(self).cast()
}
}
/// Create device table alias for modpost.
#[macro_export]
macro_rules! module_device_table {
(
$table_type: literal, $device_id_ty: ty,
$table_name: ident, $id_info_type: ty,
[$(($id: expr, $info:expr $(,)?)),* $(,)?]
) => {
#[export_name =
concat!("__mod_device_table__", ::core::line!(),
"__kmod_", module_path!(),
"__", $table_type,
"__", stringify!($table_name))
]
static $table_name: $crate::device_id::IdArray<
$device_id_ty,
$id_info_type,
{ <[$device_id_ty]>::len(&[$($id,)*]) },
> = $crate::device_id::IdArray::new([$(($id, &$info),)*]);
};
// Case for no ID info.
(
$table_type: literal, $device_id_ty: ty,
$table_name: ident, @none,
[$($id: expr),* $(,)?]
) => {
#[export_name =
concat!("__mod_device_table__", ::core::line!(),
"__kmod_", module_path!(),
"__", $table_type,
"__", stringify!($table_name))
]
static $table_name: $crate::device_id::IdArray<
$device_id_ty,
(),
{ <[$device_id_ty]>::len(&[$($id,)*]) },
> = $crate::device_id::IdArray::new_without_index([$($id),*]);
};
}